末尾效果:

澳门凯旋门注册网址,有线路由器的要紧意义,网口WAN接入,USB有线网卡AP热门输出,连上wifi之后跳转到认证页面,点击认证方可上网,有效时间10分钟,认证成功未来自动访问内定网站。

澳门凯旋门游戏网址,小说最后有编写翻译好的刷机包下载

凯旋门074网址,硬件计划:

1.Raspberry Pi 2 model B

2.USB有线网卡,笔者动用的是TL-WN722N 150Mbps 芯片是A帕杰罗9271

3.操作系统:CentOS 7

4.SD卡8GB

开始此前最好布局好代理,因为编译进度中所有的正视会联网自动下载,会有超过一半年华耗在此处,假若速度慢或然被墙……

配置编写翻译意况(一定要非root账户):

#升级组件
sudo yum update
#安装编译组件
sudo yum install libtool autoconf automake gcc-multilib bison screen gcc g++ binutils patch bzip2 flex make gettext unzip libc6 git-core git build-essential libncurses5-dev zlib1g-dev gawk quilt asciidoc libz-dev subversion

下载openwrt源码(新手不提出下载trunk,不是很稳定)

#使用非root用户登录,建立openwrt目录
mkdir openwrt
#进入openwrt目录
cd openwrt
#下载openwrt的源码
git clone git://git.openwrt.org/15.05/openwrt.git

集成nodogsplash  在/openwrt/feeds.conf.default中添加

src-git nodogsplash https://github.com/nodogsplash/nodogsplash.git

安装权限

sudo chmod -R 777 trunk
cd trunk

2凯旋门074网址.USB有线网卡。履新并设置

./scripts/feeds update -a
./scripts/feeds install -a

2凯旋门074网址.USB有线网卡。根据本身的急需改动系统暗许设置,就不细说了,这里列举多少个自笔者的安装

#这个目录下可以放置之前openwrt的备份文件,也就是说相当于openwrt的/etc/目录
/home/rophie/openwrt/openwrt/package/base-files/files/etc

#默认wifi设置
package/kernel/mac80211/files/lib/wifi/mac80211.sh

2凯旋门074网址.USB有线网卡。2凯旋门074网址.USB有线网卡。network设置

config interface 'loopback'
 option ifname 'lo'
 option proto 'static'
 option ipaddr '127.0.0.1'
 option netmask '255.0.0.0'

config interface 'lan'
 option type 'bridge'
 option proto 'static'
 option ipaddr '192.168.88.1'
 option netmask '255.255.255.0'
 option _orig_bridge 'true'
 option gateway '192.168.88.1'


config globals 'globals'
 option ula_prefix 'fda9:3639:b1e9::/48'

config interface 'wan'
 option ifname 'eth0'
 option _orig_ifname 'eth0'
 option _orig_bridge 'false'
 option proto 'dhcp'

2凯旋门074网址.USB有线网卡。wireless设置  

config wifi-device 'radio0'
 option type 'mac80211'
 option channel '11'
        #这里根据你的USB无线网卡的U口来定
 option path 'platform/bcm2708_usb/usb1/1-1/1-1.5/1-1.5:1.0'
 option noscan '1'
 option country 'CN'
 option hwmode '11n'
 option htmode 'HT40'
 option txpower '40'

config wifi-iface
 option device 'radio0'
 option network 'lan'
 option mode 'ap'
 option ssid 'APK-YFKJ'
 option encryption psk-mixed
     option key 88888888

nodogsplash设置 

config instance
  # Set to 1 to enable nodogsplash
  option enabled 1

  # Use plain configuration file as well
  #option config '/etc/nodogsplash/nodogsplash.conf'
  option network 'lan'
  option gatewayname 'OpenWrt Nodogsplash'
  option maxclients '250'
  option idletimeout '10'
  option clientforcetimeout '10'
  option redirecturl 'http://192.168.88.1:8080'

  # Your router may have several interfaces, and you
  # probably want to keep them private from the network/gatewayinterface.
  # If so, you should block the entire subnets on those interfaces, e.g.:
  #list authenticated_users 'block to 192.168.0.0/16'
  list authenticated_users 'block to 10.0.0.0/8'

  # Typical ports you will probably want to open up.
  list authenticated_users 'allow tcp port 22'
  list authenticated_users 'allow tcp port 53'
  list authenticated_users 'allow udp port 53'
  list authenticated_users 'allow tcp port 80'
  list authenticated_users 'allow tcp port 443'
  list authenticated_users 'allow tcp port 8080'

  # For preauthenticated users to resolve IP addresses in their
  # initial request not using the router itself as a DNS server,
  list preauthenticated_users 'allow tcp port 53'
  list preauthenticated_users 'allow udp port 53'
  #list preauthenticated_users 'allow tcp port 8080'

  # Allow ports for SSH/Telnet/DNS/DHCP/HTTP/HTTPS
  list users_to_router 'allow tcp port 22'
  list users_to_router 'allow tcp port 23'
  list users_to_router 'allow tcp port 53'
  list users_to_router 'allow udp port 53'
  list users_to_router 'allow udp port 67'
  list users_to_router 'allow tcp port 80'
  list users_to_router 'allow tcp port 8080'
  list users_to_router 'allow tcp port 443'

  # See https://github.com/nodogsplash for a full list of available options.

编写翻译配置

#更新版本号
svn up
#进入编译菜单
make menuconfig
Y:选择Y,该软件将被编译,并且加入到你的目标固件里;
M:选择M,该软件包将会被编译,但不会被放入固件里。在需要它的时候,可以用OPKG软件包管理器进行安装;
N:选择N,该软件包将不会被编译,也不会被安装进固件。
方向键是移动光标
回车键是确认
空格键是选择,可以代替Y/M/N键的使用
/:搜索

Target System 选择 brcm2708-bcm2709 按Y选中
须要集成的软件

kmod-usb-core kmod-usb-ohci kmod-usb-uhci kmod-usb2 usbutils kmod-ath
kmod-ath9k kmod-ath9k-common kmod-ath9k-htc luci-i18n-base-zh-cn
kmod-nls-cp437 kmod-nls-utf8 kmod-fs-vfat kmod-nls-iso8859-1
wireless-tools hostapd

编译

make V=99

很久将来你已经能够在/bin/brcm2708下找到openwrt-brcm2708-bcm2709-sdcard-vfat-ext4.img刷机固件了

 

 

 

  

 

相关文章